You can share your Node/Pro's data with the community so that it appears on AirVisual global air pollution map: https://airvisual.com/world
This data will be available for anyone to access through the AirVisual air quality app and free air quality API.

Become an outdoor data contributor by broadcasting your Node's outdoor data, with the following simple steps:

1. Choose your location

The Node/Pro is designed to perform excellently in outdoor environments, however the following must be taken into consideration:

+ Access to electrical outlet and a Wi-Fi connection.

For sustained readings you will need a power supply and internet connection. *Important*: we recommend using an indoor and/or fully covered power outlet, to ensure complete protection from weather conditions.

+ Sheltered from weather conditions such as rain, wind, direct sunlight.

You might consider using existing building structures such as a porch, covered balcony, or overhanging roof, otherwise a simple covering such as a Stevenson's screen will offer a good shelter.

+ Good airflow - this is important!

The Node/Pro takes its readings by passing air through its central sensor. Airflow is maintained via the Node/Pro’s internal fan, but you will still need to ensure the air can get in easily. Make sure either the top or bottom of the Node/Pro’s central tunnel is completely unobstructed (or better, both!), and that air can freely flow around the device as well.

Important: allow at least 20cm of open space above the Node/Pro's middle hollow, so that airflow can freely enter.

+ No higher than 10 meters

The most representative readings are close to where people are breathing (ie, not up in the sky). If you plan to install it higher than 10 meters, please contact us directly to discuss options and data validation.

+ Away from polluting sources

Cars, outdoor BBQs, chimneys and kitchens are all highly localized sources of air pollution that might affect the ambient air quality reading of the Node/Pro.

2. Add the Node/Pro to your AirVisual profile

You can add your Node/Pro to your profile either through the AirVisual website or mobile app.

App: open the "My Devices" tab > Add a new device.

Webpage: log in, click your profile’s drop-down menu and choose ‘My devices’ > Add a device.

3. Submit your Pro’s information online

From your "My Devices" page, select your device then either click directly on the left hand side "Make Public" option, or enter the device settings via the 3 dots at the right side.

> select 'Location' tab > "Become a public station".

Here, give your station its name as it will be seen on the map (including a relevant geographical name, although you may want to add a personal touch, e.g. your business name, if installed by a business), its GPS coordinates, the city, state and country.

You will also be asked to submit some photos to show the device's installation. Send photos from 1 meter with different angles and a picture 10 meters away for us to verify the environment. These will not be public, they are purely used to validate the installation. Also please confirm that you don't have any exhaust or smoke in the Node/Pro's vicinity such as: cooking, heating stove, BBQ, people smoking, etc.

To add a monitoring station to a country/state/city which is not yet listed, simply choose to "Add new country/state/city" from the dropdown list (as below):

*Note on GPS co-ordinates: a link is provided to help you determine this. When supplying these, please consider your own privacy and safety. In certain countries, we usually recommend applying 100 meters deviation.

Submit!

4. Validate location

Once received, we will then validate your Node/Pro’s readings for 1-2 weeks, before publishing it online.If the system finds any issues, we will come back to you with more instructions.

5. Congratulations! You have moved your community a step closer to beating local pollution.

Now your neighbours and global air quality data enthusiasts can draw valuable conclusions and preventative actions from the state of your community’s air.

Important note: this feature of sharing outdoor data to the public is currently NOT available in mainland China due to regulatory reasons preventing the publication of non-governmental outdoor air pollution data. We're working with some very smart and understanding people in the Chinese ministry of environment and we hope to get an authorization from the government to make this feature available in the mid-term future.

Did this answer your question?